Xplor FA48 Fork Flow Adjuster Kit – Gen2
The WP Xplor 48 fork has always had the same problem — it can feel soft and vague one minute, then harsh and unpredictable the next. There’s no real balance, no usable adjustment, and when you start pushing the bike, confidence drops quickly.
Our Gen2 Flow Adjuster kit fixes that properly.
This isn’t just a revalve or a minor tweak. We’ve reworked how the fork functions, converting it into a true dual-function system so both legs are working together the way a fork should. Straight away, that improves balance, feel, and consistency through the stroke.
But the real difference is the Flow Adjuster.
Real Compression Control — Not Just Clickers
The standard Xplor fork has very limited usable adjustment. You’re often stuck between settings that feel too soft or too harsh, with no real middle ground.
The Flow Adjuster changes that completely.
It gives you a wide, usable range of compression control — allowing you to tune the fork to suit your riding in seconds.
- Open it up → plush, free-moving feel for technical terrain
- Dial it in → more hold-up and support for speed and bigger hits
No pulling the fork apart.
No chasing settings.
No compromise.
What You Feel on the Bike
With the Gen2 system installed, the fork becomes predictable and controlled.
- Improved small bump comfort
- Stronger mid-stroke support
- Better progression through the stroke
- Reduced harshness without losing control
The front end tracks better, holds up under load, and gives you confidence to push — whether you’re riding tight single trail or opening it up in faster terrain.
One Setup, Multiple Conditions
The biggest advantage of the Flow Adjuster is versatility.
Instead of being locked into one setup, you can quickly adapt the bike to suit the conditions:
- Technical, slow terrain → softer, more compliant feel
- Faster, rough terrain → increased support and control
It’s the same bike — just tuned to how and where you ride.
Built from Real Testing
This system wasn’t developed on paper.
It’s been tested across multiple bikes, riders, and conditions — from tight bush trails to faster, rough terrain — refining what actually works, not what just sounds good.
The Result
A fork that finally does what it should:
- Plush when you need comfort
- Controlled when you need support
- Adjustable enough to suit real-world riding
That’s the difference with the Xplor FA48 Gen2 Flow Adjuster kit.
