Xplor FA48 Flow Adjuster kitRegular price $495.00 Save $-495.00
Our successful 'FA48' Flow adjuster kit has been revamped, tuned and further dialed in over the last 2 years resulting in further gains and upgrades available for your WP Xplor fork. All updates available and will work with the 2020 models right back to the first year Xplor in 2017!
After a lot of feedback from our test crew, riders and customers we have worked out more options with this kit offering higher performance, even more adjust-ability and most importantly greater value.
Our ‘Flow adjuster kit’ comes with a Mid-speed piston and new post assembly matched with a tune able shim stack to suit the Xplor48 fork. This completely swaps in as a replacement for the very weak OEM Wp comp adjuster on the compression side cartridge rod. The Krooztune ‘FA’ fork cap is tuneable in fine increments allowing for a true 20+ clicks of workable and huge noticeable adjustment!
The latest addition of a 'Base adjuster' we find a working range of around 16 clicks. This achieves a much more plush feel over the rocks and logs with huge gains in plushness without making the fork overall too soft or a mushy feeling.
The powerful 'FA' adjuster can be set from a super firm setting (1 click out from full in) all the way through to a plush setting at around 18-20 clicks out. Winding or clicking this Adjuster on the FA fork cap actually changes the comp shim float in the mid speed piston allows super powerful adjustment. Almost like a soft MX like setup to super plush setting in clicks.
Our kit comes with 3 shim/setting options. We install Medium on all our kits unless advised otherwise, we can arrange to already pre set your option. Please leave in comment box at check out. Setting sheet supplied
See table below for our experience found in tuning our kit once installed, highlighting the main issues we found on our testing program. We would adjust in these increments until great rider feeling is achieved.
|Trouble shoot / issues||FA CAP ADJUSTER||FA BASE ADJUSTER|
|Fork diving / running low||1 click firmer|
|Fork Bottoming hard||1-2 clicks firmer|
|Fork Diving and overall soft||1-2 clicks firmer||1-2 clicks firmer|
|Fork running high in stroke/hard||1-2 clicks softer|
|Fork harsh on small rocks/ roots||1-2 clicks softer|
|Small bump absorption tuning||Adj Softer or harder|
|Jumps / fork dive / ride height feel||Adj softer or harder|
|Too Hard all over||2 clicks softer||2 clicks softer|
**Clicks firmer 'in' clockwise direction / softer is 'out' anticlockwise** All Setting adjusted from the supplied 'Base Clicker' Setting
Test riders found a comfortable window fairly quickly that suited their ability and terrain in a matter of minutes. After dialing in your FA adjuster for great hold up on downhills and landings, the fine tuning for tree roots, rocks and logs can be fine tuned with our base compression adjuster giving you the plushness and softer feel in your hands when riding the trails or racetrack.
The Setting is simply not 'stuck' on the Suspension tuners setting/valving specification. Once installed you have the ability to virtually 'revalve' on the fly!
Fitting this kit yourself? KROOZR WP cap spanner is available in the xplor collection
Dealer Pricing and Parts are Available Separate. Please send us a quick message in the box below and we will email pricing options
Key Updates for all kits developed for 2020All new updates are added to all our kits right back to 2017 . As time went by we refined the setup and setting options
Xplor Shock Upgrade KitRegular price $249.95 Save $-249.95
Xplor Shock upgrade it for the KTM EXC Offroad models. Comes with 3 setting options so you can best decide the base valving setting most suited to you.
Kit Fits : All KTM Xplor Shocks 2017-2020
After hours on the trail with our test bike and riders we have put together an upgrade for the hard fast acting KTM Xplor shock. After trying various valving settings initial plushness was not completely achieved until we installed a bleed circuit into the compression pathway just like other opposition brand suspension have.
The XPLOR shock has no ‘give’ on very initial action and softening the valving or setting only resulted in wallow and blow out. Our shaft bleed mod comes with a new compression valve spacer , CNC machined ready to bolt straight onto the shock shaft (replacing the oem shaft spacer swap in / out). A simple procedure to drill the new bleed circuit is then required (very easy to do with our supplied drill bit and instruction). All valving is ready to go on and assembled as per shock building procedures.
**Optional shims included to adjust to all 3 setup's. Medium setting is pre installed on both compression and rebound, allowing minor simple changes if required at all from our setting recommendation.
KTM EXC/XC-W Complete Suspension KitRegular price $695.00 Save $-695.00
Kits Available to fit all KTM EXC / XC-W 2017 -2020 Models.
XC-W Models please select EXC range
A complete Suspension Upgrade kit for the Xplor Equipped KTM EXC and XC-W Offroad models. Kit Includes Hard parts and 3 setting options so you can best decide the base valving setting most suited to your speed and skill level.
Soft - Medium - Firm
*Optional shims included to adjust to all 3 setup's.
All kits Shipped with Base setting installed - 'Medium'
Kit Includes :
See individual Kits for detailed info
Xplor Nitrogen Bladder KitRegular price $129.95 Save $-129.95
Our Gas Bladder kit Converts your WP XPLOR shock to a Bladder nitrogen system allowing the shock to perform at a high 'Factory' Level. The Oem Unit in these WP shocks have a floating piston standard that separates the oil and gas from mixing. The issue with this while it is cheap to produce, generates heat and friction as the piston moves up and down along with the shocks movement when hitting bumps.
We find a much better feeling and performance from this shock when it is changed to bladder system as found on the Factory WP Trax shock and all Japanese Showa/KYB units. Making an already great WP shock better.
All Kits are Billet machined and supplied with Genuine KYB bladders internally for a high quality, ease of ordering spares and reassurance.
Xplor FA48 Flow Adjuster - Basic KitRegular price $395.00 Save $-395.00
Our Original Setup designed in 2017 for the Xplor 48 Fork. This 'Base kit' has all the improvements and refined parts included in our 'Complete kit' but at a more simpler cost effective setup.
A simple mod to make your Xplor fork super adjustable from Soft to Firm in seconds using our Australian designed 'Flow Adjustment' .
This setup includes
-FA adjusater Cap
-FA Mid Valve Post
-Instructions and 3 Valving options to choose on install
Soft - Medium - Firm
Xplor Xtrig PreloaderRegular price $280.00 Save $-280.00
Xtrig Preloader to suit all Xplor Shocks.
When mounting the shock absorber end eye has to be dismantled. Best Installed at time of service when shock has shaft removed.
KTM EXC 250,300 model year from 2017-
KTM EXC-F 250,350,450,500 model year from 2017-
KTM XC-W 125,150 model year from 2017-
Flat Rate Express shipping to USA, Canada and NZ $40AUD
Shipping times only 2-5 days from dispatch